![]() Try getting another keyboard and verifying that your machine is actually working correctly - if there's a red led lit (or flashing) on the main board you might have a hardware issue. If you did not reach the Open Firmware step - tough luck. You can set auto-boot? back to true now.) Troubleshooting (In the rare event it actually did work - you're done. aaaand if your luck is anything like mine, it won't work. If you still didn't manage to boot into the Open Firmware consult the Troubleshooting section, otherwise make sure your machine always boots into the Open Firmware: If you fall into the first category - congratulations, you can now wear your smug smile until the end of time, otherwise - don't get discouraged too quickly thanks to the following instructions you'll only have to do this once - for me it was more like five or six times. Try several more times while swearing a lot and randomly pressing and releasing the key combination.Get awfully discouraged with the whole enterprise.Fail to reach the Open Firmware screen a few more times.Try pressing the combination right after you hear the initial boot up sound.Fail to reach the Open Firmware screen.Fail to reach the Open Firmware screen several times.Boot your machine while holding Windows + Alt + o + f keys.Release the keys once you see the Open Firmware screen.Boot your machine while holding Command + Option + o + f keys.This process might be quite random and nerve-racking unless you own an Apple-issued wired keyboard. Now here's the fun part - we'll need to boot into the Open Firmware in order to change the boot sequence. Now you can plug your USB drive in the PowerMac and proceed to the next section. ![]() This varies from platform to platform so unless you're using GNU/Linux you'll have to google. PreparationStart off by downloading an image (let's call it image.img) and burning it onto a pendrive.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |